Product Features: 
Good adhesion, fast drying speed, resistant to dry and wet rubbing.

Main Ingredients: 
Polyurethane/acrylic emulsion, pigment, cosolvent, water.

Technical Parameters:
Viscosity: 15±5s (25℃)    Fineness: ≤10µmpH  Value: 8.0-9.5.

Instructions: 
Store hermetically at 5-35℃. Stir thoroughly before use. Dilute with a small amount of water or ethanol if needed.

Product Features: 
Fast drying, bright color, clear printing of dots and fine characters.

Main Ingredients: 
Acrylic emulsion, pigment, cosolvent, additives, water.

Technical Parameters:
Viscosity: 15±5s (25℃)   Fineness: ≤10µmpH  Value: 8.0-9.5.

Instructions: 
Store hermetically at 5-35℃. Stir well before use. Dilute with a small amount of water or ethanol.

Product Features: 
Strong adhesion, waterproof, wear-resistant and quick-drying. It boasts excellent transfer performance, wide printing adaptability, color fastness and stable storage property.
Main Ingredients: 
Organic pigment, special acrylic emulsion, additives, water.
Technical Parameters:
Viscosity: 20±5s (25℃)   Fineness: ≤10μmpH    Value: 8.0-9.5.
Instructions: 
Stir thoroughly and filter before use. Seal the container tightly after opening to avoid dust contamination and surface crusting. Adjust viscosity and color density with clean water if necessary. Keep away from high temperature and direct sunlight. Shelf life: one year.

Product Features: 
Good adhesion, excellent waterproof performance, dry and wet rubbing resistance.

Main Ingredients: 
Acrylic emulsion, pigment, additives, water.

Technical Parameters:
Viscosity: 20±5s (25℃)   Fineness: ≤10μmpH  Value: 8.5-9.5.

Instructions: 
Store hermetically at 5-35℃. Stir thoroughly before use. Dilute with a small amount of water or ethanol.

Product Features: 
Low viscosity, high pigment content and full color tone.
Main Ingredients: 
Standard four-color organic pigments, acrylic resin, acrylic emulsion, additives, water.
Technical Parameters:
Viscosity: 15±5s (25℃)   Fineness: ≤8μmpH   Value: 8.5-9.5.
Instructions: 
Recommended printing order: yellow, red, blue, black. Adjust ink properties if changing the sequence. Stir fully before use to ensure consistent color. Add thinner properly if viscosity rises or drying slows down. Add appropriate stabilizer when pH drops or drying speeds up. Use exclusive defoamer only for excessive bubbles, no alternative types allowed. Shelf life: one year. Adjust stored ink to standard viscosity with thinner before use. Seal and store indoors at normal temperature.

Product Features:
High gloss, high dot clarity and bright color.
Main Ingredients:
Acrylic emulsion, pigment, additives, water.
Technical Parameters:
Viscosity: 15±5s (25℃)   Fineness: ≤5μmpH  Value: 8.5-9.5.
Instructions:
Stir well and filter before use. Seal tightly after opening to prevent dust contamination and surface crusting. Adjust viscosity and color density with clean water or special diluent if needed. Keep away from high temperature and direct sunlight. General shelf life: one year.